Qualifications


Chief Engineer of Steam and Motor Vessels of Any Horsepower



Accredited Marine Surveyor



Expert in construction and repair of major shipboard systems including: hull, main propulsion, generating, piping, electro-hydraulic, HVAC/Refrigeration, and pneumatic.



Expert in Passenger Vessel operations, with emphasis on engineering safety.



Preparation of vessels for U.S. Coast Guard and International Classification Society hull and machinery inspections.



Hazardous waste operations and emergency response (HAZWOPER) trained and fully qualified in all aspects of oil transfer operations in compliance with OPA 90 standards.



Factory Trained Master Mechanic for Caterpillar 3500 Series Diesel Engines.



Commercial Diver



Experience


1996-1998; 2000-Present
XXXXXXXXXXXXX, Inc.
Chief Engineer

Supervised engineering aspects of construction of the M/V XXXXXX in Atlantic Marine, Inc. Coordinated installation of machinery with shipyard and naval architects, for this 3500 passenger vessel. Oversaw change orders from owner to ensure overall project quality. Conducted acceptance trials on behalf of owner. Operated casino cruises on Lake Michigan as Chief Engineer of vessel. Supervised Engineering Department of 24 licensed and unlicensed personnel. Responsible for engineering safety of passengers, crew and vessel.

1998- Present
Independent Marine Consultant
Served as owners representative on various Ocean and Great Lakes Passenger Vessels. Assisted Shipyard and Ships Crew with structural and engineering repairs. Advised Owners on necessary actions to conform with Coast Guard and A.B.S. rules. Conducted Underwater Inspection and repair of vessels as Third Party Examiner, in accordance with U.S. Coast Guard Special Vessel Inspection Program. Was responsible for ensuring that all aspects of the tail-shaft and bearing replacement conformed to proper engineering standards. Conducted annual inspections of hull and internal structural examinations to ensure that vessels remained in compliance with the Special Vessel Inspection Program. Prepared and submitted the required reports to U.S. Coast Guard, detailing all aspects of the repair and inspection procedure.

Conducted surveys of commercial and large recreational vessels on behalf of various insurance companies and vessel owners.




1990-1996

XXXXXXXXXX,Inc
Corporate Chief Engineer

Responsible for mechanical aspects of construction, maintenance, and repair of fleet of casino vessels. Overall supervision and implementation of company-wide safety practices relating to engineering. Responsible for shipyard conversion of M/V XXXXXX from dinner excursion vessel to offshore casino vessel. Oversaw over 100 shipyard and outside contractors in electrical, structural, and mechanical changes to vessel. Was responsible for work necessary to get A.B.S. Load Line Certificate for this vessel.



1990

XXXXXXXXXXXXXX, Inc.

Assistant Engineer, USNS Antares T-AKR 294

Responsible for watch operation on 120,000 horsepower steam propulsion plant. Coordinated boiler water and feed water testing on two of the largest commercial boilers ever installed on merchant vessels. Assisted with plant start up and shut down operations. Vessel carried military Roll on - Roll off cargos between U.S. and foreign ports.



1989-1990

XXXXXXXXXXXXXX, Inc.
Project Engineer

Supervised conversion and reflagging of the M/V XXXXXXX. Acted as owner's representative for six-month shipyard period. Responsible for all aspects of the conversion and sale of this deep sea dive support vessel.



1989

XXXXXXXXXXXXXXXXXX, Inc.

Assistant Engineer, USNS Dutton T-AGS 22

Watch engineer aboard this 8500 horsepower, 600 lb. steam turbine plant. Responsible for evaporators and lube oil purification; operation of steam propulsion machinery and auxiliaries. Vessel operated in support of the Naval Oceanographic Office, on a run between West Africa and South America.



1984-1989
XXXXXXXXXXXXXXXXXX, Inc.
Chief Engineer

Served as Chief Engineer of various company tugboats and motor barges.

Assistant Port Engineer

Duties included preparing vessels and crews for U.S.C.G. inspections and assisting Port Engineer with large-scale repair projects and drydockings. Underwater inspection and repair of vessels including routine inspection and damage assessments.



1979-1984

United States Marine Corps

Rifle Platoon Commander-Company Executive Officer

Direct supervision and training of up to 140 Marines afloat and ashore.



Education


United States Merchant Marine Academy, Kings Point, NY
1979 Bachelor of Science, Dual Major: Marine Engineering and Nautical Science.

Professional Diving School of New York, City Island, NY

1985 Commercial Air Diver.



Licenses and Affiliations


United States Coast Guard - Chief Engineer of Steam and Motor Vessels of Any Horsepower.



United States Coast Guard - Third Mate, Ocean Steam or Motor Vessels of Any Gross Tons.



Society of Accredited Marine Surveyors Accredited Marine Surveyor



American Society for Testing and Materials (ASTM) Member, Ships and Marine Technology Subcommittee



Iowa Racing and Gaming Commission Occupational License



Illinois Gaming Board Occupational License



Indiana Gaming Commission - Occupational License



Propeller Club of Jacksonville



U.S. Merchant Marine Academy Alumni Association of Jacksonville, Past President



Publications






Expert Witness Experience



Available upon request