|
|
 |
|
|
| One of the world's leading authorities on livestock and fence related accidents.
|
|
|
|
| EW #858 has 45 years expertise in engineering, accident reconstruction, lemon law inspection and testimony and provides design, consulting and custom manufacturing of small boats.
|
|
|
|
| Expertise in electrical devices and electronics technology.
|
|
|
|
| Dealer Expert, Automotive Industry Expert: Liability and damages in manufacturer-dealer and customer-dealer lawsuits
|
|
|
|
| Automobile consultant-12 years. 40 years experience with GM,Chrysler and Ford, Plus Boeing. Witness on 30 cases. Extensive International experience. Please see website for complete list of detail.
|
|
|
|
| Experienced in auditing records and operations, preparation for, and testimony in state and federal courts for prosecution and defense.
|
|
|
|
| 35 years of international experience in safety, personal injury, products liability, warnings, human factors and manufacturing.
|
|
|
|
| 40+ Years experience as a Mechanical Engineer dealing with all manner of machinery and vehicles.
|
|
|
|
| Motorsports Engineer with over 26 years experience in the design, manufacturing and implementation.
|
|
|
|
| 25 yrs. expertise in sales procedures and tactics, manufacturer warranties and service contracts, mechanical and body repair, salvage titles, diminished value and repair misrepresentation.
|
|
|
|
| CPA with over 35 years experience with litigation support matters
|
|
|
|
| Mechanical engineering consultant specializing in the analysis and determination of the causes of failures or accidents involving mechanical engineering disciplines. Provide expert testimony.
|
|
|
|
| 27 years of experience in product design and manufacturing, premises design and maintenance, and accepted safety practices and accident prevention methods.
|
|
|
|
| CPA, Certified Internal Auditor with 25 years as CFO/Controller for Retail Auto Dealerships of varying sizes and manufacturers.
|
|
|
|
| Coming Soon
|
|
|
|
| Highly regarded independent Engineering Materials Consultancy. Investigations into wide range of incidents including litigations & personal injury. Supported by in-house UKAS accreditied laboratories.
|
|
|
|
| Expert witness for Aircraft engine and Automotive structural issues Experience at GE Aircraft Engines, GE Power Systems and GE Research Center,Instron and Rolls-Royce.
|
|
|
|
| Expert in valuation of damages for business, information technology, software selection and implementation and web commerce, he has a quarter century of business and technology consulting experience.
|
|
|
|
| Over ten years serving as an expert witness in multi-state and federal cases. Extensive attorney referral list.
|
|
|
|
| Analyse crash survivability based on biomechanical parameters with primary interest in children, and infants. Assess cause and affect "the physics" of a crash.
|
|
|
|
| Metallurgical engineer with experience of > 12 years in plant operations in Indian Zinc Smelters and > 18 years in consulting engineering, project management of Base metals.
|
|
|
|
| Looking for a automobile manufacturing expert?
|
|
|
Find Automobile Manufacturing experts and consultants for Automobile Manufacturing litigation support at www.expertwitness.com. Available to be Automobile Manufacturing expert witnesses and provide Automobile Manufacturing forensic consulting in Automobile Manufacturing litigation, in addition prepare Automobile Manufacturing expert witness reports for use in deposition and/or in-court trial testimony.
|
Categories To Find "Automobile Manufacturing" Experts:
|
ADHESIVES |
|
An adhesive is a compound that adheres or bonds two items together. Adhesives may come from either natural or synthetic sources. Some modern adhesives are extremely strong, and are becoming increasingly important in modern construction and industry.
|
AMBULANCE |
|
An ambulance is a vehicle designated for the transport of sick or injured people. The first ambulances called by that name were horse ambulances used in the American Civil War. The first practical ambulances were created by Dominique Jean Larrey, a French surgeon (17661842), for use in the Napoleonic Wars. Modern-day ambulances are typically large automobiles on a van or light truck chassis.
|
ANTIQUES |
|
Antiques (Latin antiquus, old) are objects which have reached an age which makes them a witness of a previous era in human society.
Antiques are usually objects which show some degree of craftsmanship, or a certain attention to design such as a desk or the early automobile. In a consumer society, an antique is above all an object whose atypical construction and age give it a market value superior to similar objects of recent manufacture. Any historical museum makes a considerable use of antiques in order to illustrate historical events and give them a practical context.
|
ARBITRATION / MEDIATION |
|
Arbitration is a form of mediation or conciliation, where the mediating party is given power by the disputant parties to settle the dispute by making a finding. In practice arbitration is generally used as a substitute for judicial systems, particularly when the judicial processes are viewed as too slow, expensive or biased. Arbitration is also used by communities which lack formal law, as a substitute for formal law.
Mediation consists of a process of alternative dispute resolution in which a (generally) neutral third party, the mediator, using appropriate techniques, assists two or more parties to help them negotiate an agreement, with concrete effects, on a matter of common interest. More generally speaking, the term "mediation" covers any activity in which an impartial third party (often a professional) facilitates an agreement on any matter in the common interest of the parties involved.
|
AUTO - AIR BAGS |
|
An airbag, also known as a Supplementary/Secondary Restraint System (SRS) or as an Air Cushion Restraint System (ACRS), is a flexible membrane or envelope, inflatable to contain air or some other gas. Air bags are most commonly used for cushioning, in particular after very rapid inflation in the case of an automobile collision.
|
AUTOMOBILE ACCIDENT |
|
Car accidents are damaging events involving road traffic, particularly automobiles. They can cause damage to vehicles, people or structures. Car accidents also called traffic collisions, auto accidents, road accidents, personal injury collisions, motor vehicle accidents, and (particularly by American radio traffic reporters) crashes kill an estimated 1.2 million people worldwide each year, and injure about forty times this number (WHO, 2004). The term "accident" is considered inappropriate by some, as reliable sources estimate that upwards of 90% are the result of driver negligence.
|
AUTOMOBILE ELECTRICAL SYSTEMS |
|
An automotive electrical systems consists of several different components that provide the electrical power needed to start the car and provides all the functionality in the passenger compartment.
Lighting systems, battery and charging system, alternator, grounding system, all power and features like horn, radio, power windows, and door locks, security, wind shield wipers, and more.....
|
AUTOMOTIVE |
|
Automotives refers to design and manufacture of self-propelled mobility systems such as automobiles, trucks and buses, construction equipment, aircraft, aerospace vehicles, marine transports, trains and railroads, and other transit systems. Usually these mobility systems carry its own source of power while in operations, with the exceptions being electric locomotive and Magnetic levitation train.
|
BATTERIES |
|
In science and technology, a battery is a device that stores chemical energy and makes it available in an electrical form. Batteries consist of electrochemical devices such as one or more galvanic cells, fuel cells or flow cells. The earliest known artifacts that may have been batteries are the Baghdad Batteries, from some time between 250 BCE and 640 CE. The modern development of batteries started with the Voltaic pile developed by the Italian physicist Alessandro Volta in 1800. The worldwide battery industry generates 48 billion dollars in sales annually (2005 estimate).
|
BICYCLE HELMETS |
|
A bicycle helmet is designed to provide head protection for cyclists. Helmets are most suitable for preventing injury in straight falls, and for reducing friction related damage to the head. Modern bicycle helmets were first developed in the 1970s.
|
CARBON MONOXIDE EMISSIONS |
|
Carbon monoxide, chemical formula CO, is a colorless, odorless, tasteless, flammable and highly toxic gas. It is a major product of the incomplete combustion of carbon and carbon-containing compounds. It is less dense than air under ordinary conditions, however it accumulates on the ground, meaning that if poisoning causes loss of consciousness the amount of carbon monoxide inhaled increases and so fatality is radically increased. It is very slightly soluble in water and burns in air with a characteristic blue flame, producing carbon dioxide; it is a component of producer gas and water gas, which are widely used artificial fuels. It is a reducing agent, removing oxygen from many compounds and is used in the reduction of metals, e.g., iron , from their ores. At high pressures and elevated temperatures it reacts with hydrogen in the presence of a catalyst to form methanol. Carbon monoxide is formed by combustion of carbon in oxygen at high temperatures when there is an excess of carbon. It is also formed with a byproduct oxygen by decomposition of carbon dioxide at very high temperatures (above 2,000 °C). It is present in the exhaust of internal-combustion engines, often the exhaust of automobiles, and is generated in coal stoves, furnaces, and gas appliances that do not get enough air. This may be due to insufficient ventilation or other reasons.
|
CONSUMER MARKETING |
|
Find CONSUMER MARKETING experts and consultants for CONSUMER MARKETING litigation support. Available to be CONSUMER MARKETING expert witnesses and provide CONSUMER MARKETING forensic consulting in CONSUMER MARKETING litigation, in addition prepare CONSUMER MARKETING expert witness reports for use in deposition and/or in-court trial testimony.
|
CRISIS MANAGEMENT |
|
Crisis management involves identifying a crisis, planning a response to the crisis and confronting and resolving the crisis. Crisis management can be applied in almost any field of endeavor, but it is most commonly used in international relations, political science and management. For more about crisis management in international relations, see International crisis.
|
DUMBWAITER |
|
A small elevator used to transport food or other items between floors of a building.
An elevator is a transport device used to move goods or people vertically. Outside North America, elevators are known more commonly as lifts, although the word elevator is familiar from American movies and television shows, just as some Americans are aware of lift from imported entertainment. Other languages may have loanwords based on either elevator (e.g. Japanese) or lift (e.g. Cantonese). Because of wheelchair access laws, elevators are often a requirement in new buildings with multiple floors.
|
ECONOMIC ANALYSIS |
|
Economic base analysis was developed by Robert Murray Haig in his work on the Regional Plan of New York in 1928. Briefly, activities in an area divide into two categories basic and non-basic. Basic industries are those exporting from the region; non-basic (or service) industries support basic industries. Because of data problems, it is not practical to study industry output and trade flows to and from a region. As an alternative, basic and non-basic concepts are operationalized using employment data.
|
ELEVATOR |
|
An elevator is a transport device used to move goods or people vertically. Outside North America, elevators are known more commonly as lifts, although the word elevator is familiar from American movies and television shows, just as some Americans are aware of lift from imported entertainment. Other languages may have loanwords based on either elevator (e.g. Japanese) or lift (e.g. Cantonese). Because of wheelchair access laws, elevators are often a requirement in new buildings with multiple floors.
|
ENGINEERING - AUTOMATION |
|
Automation (ancient Greek: = self dictated) or industrial automation or numerical control is the use of control systems such as computers to control industrial machinery and processes, replacing human operators. In the scope of industrialization, it is a step beyond mechanization, where human operators are provided with machinery to assist them with the physical requirements of work.
|
ENGINEERING - CONTROL SYSTEMS |
|
Control engineering is the engineering discipline that focuses on the mathematical modelling systems of a diverse nature, analysing their dynamic behaviour, and using control theory to make a controller that will cause the systems to behave in a desired manner.
|
ENGINEERING - ELECTRICAL |
|
Electrical engineering (sometimes referred to as electrical and electronics engineering) is a professional engineering discipline that deals with the study and application of electricity, electronics and electromagnetism. The field first became an identifiable occupation in the late nineteenth century with the commercialization of the electric telegraph and electrical power supply. The field now covers a range of sub-disciplines including those that deal with power, control systems, electronics and telecommunications.
|
ENGINEERING - FORENSIC |
|
Forensic engineering is the investigation of materials, products, structures or components that fail or do not operate/function as intended. A criminal aspect is possible in any investigation but is not always the case; civil cases are much more common. Generally the purpose of a forensic engineering investigation is to locate cause or causes of failure with a view to improve performance or life of a component. It can also involve investigation of intellectual property claims, especially patents. Methods used in forensic investigations include reverse engineering, inspection of witness statements, a working knowledge of current standards, as well as examination of the failed component itself. The fracture surface of a failed product can reveal much information on how the item failed and the loading pattern prior to failure.
|
FORENSIC LOCKSMITH |
|
Practitioners in the lock trade are called locksmiths. Although fitting of keys to replace lost keys to automobiles and homes and the changing of keys for homes and businesses to maintain security are still an important part of locksmithing, locksmiths today are primarily involved in the recommendation and installation of higher quality locksets and the design, implementation and management of keying and key control systems. Most locksmiths are also involved in electronic lock servicing, such as making keys for transponder-equipped vehicles and the implementation and application of access control systems protecting individuals and assets for many large institutions.
|
INDUSTRIAL AUTOMATION |
|
Automation (ancient Greek: = self dictated) or industrial automation or numerical control is the use of control systems such as computers to control industrial machinery and processes, replacing human operators. In the scope of industrialization, it is a step beyond mechanization. Whereas mechanization provided human operators with machinery to assist them with the physical requirements of work, automation greatly reduces the need for human sensory and mental requirements as well.
|
INDUSTRIAL ENGINEERING |
|
Industrial engineering is the engineering discipline that concerns the design, development, improvement, implementation and evaluation of integrated systems of people, knowledge, equipment, energy, material and process. Industrial engineering draws upon the principles and methods of engineering analysis and synthesis, as well as mathematical, physical and social sciences together with the principles and methods of engineering analysis and design to specify, predict and evaluate the results to be obtained from such systems. Industrial engineers work to eliminate wastes of time, money, materials, energy and other resources.
|
LIQUIFIED PETROLEUM GAS - LPG - LP GAS |
|
Liquified petroleum gas (also called liquefied petroleum gas, liquid petroleum gas, LPG, LP Gas, or autogas) is a mixture of hydrocarbon gases used as a fuel in heating appliances and vehicles, and increasingly replacing chlorofluorocarbons as an aerosol propellant and a refrigerant to reduce damage to the ozone layer. Varieties of LPG bought and sold include mixes that are primarily propane, mixes that are primarily butane, and mixes including both propane and butane, depending on the seasonin winter more propane, in summer more butane. Propylene and butylenes are usually also present in small concentration. A powerful odorant, ethanethiol, is added so that leaks can be detected easily. LPG is manufactured during the refining of crude oil, or extracted from oil or gas streams as they emerge from the ground.
|
MOTOR VEHICLE ACCIDENT MVA |
|
Motor-vehicle collisions are damaging events involving road traffic, particularly automobiles. They can cause damage to vehicles, people or structures. Motor-vehicle collisions also called traffic collisions, auto accidents, road accidents, car accidents, personal injury collisions, motor vehicle acccidents, and (particularly by American radio traffic reporters) crashes kill an estimated 1.2 million people worldwide each year, and injure about forty times this number.
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
POLLUTION |
|
Pollution is the release of environmental contaminants. Carbon monoxide, sulfur dioxide, chlorofluorocarbons (CFCs), and nitrogen oxides produced by industry and motor vehicles are common air pollutants. Sunlight converts nitrogen oxides and hydrocarbons to ozone or smog. Water pollutants may consist of a wide range of organic and inorganic chemicals such as heavy metals, petrochemicals, chloroform, and bacteria. Water pollution may also occur in the form of thermal pollution and dissolved oxygen depletion. Soil contamination is an important aspect of environmental pollution; this phenomenon occurs when chemicals are released by spill or underground storage tank leakage. Among the most significant soil contaminants are hydrocarbons, heavy metals, MTBE, herbicides, pesticides and chlorinated hydrocarbons. The U.S., Russia, China and Japan are the world leaders in air pollution emissions; however, Canada is the number two country on a per capita basis.
|
PRODUCT SAFETY |
|
The Consumer Product Safety Commission (CPSC) is an independent agency of the U.S. federal government created in 1972 through the Consumer Safety Act to protect against unreasonable risks of injuries associated with consumer products. As of 2005 its chairman is Hal Stratton, a Republican. The two other commissioners on the three-member board are (as of February 2006) Thomas Hill Moore (Democrat) and Nancy Nord (Republican).
|
| |
