AEROSOLS |
|
Aerosol spray is the name given to a type of canister containing liquid under pressure from pressurized vapor in equilibrium with another liquid, which often also dissolves the payload (see propellant below). When the can's valve is opened, the liquid is forced out of a small hole and emerges as an aerosol, or mist. As gas expands to drive out the payload, some propellant evaporates inside the can to maintain an even pressure. Outside the can, the droplets of propellant evaporate rapidly, leaving the payload suspended as very fine particles or droplets. Typical liquids dispensed in this way are insecticides, deodorants and paints. An atomiser is a similar device that is pressurised by a hand-operated pump rather than by stored gas.
|
CHILD PORNOGRAPHY |
|
Generally, child pornography (sometimes referred to as CP, child porn, KP, or kiddie porn) is an illegal form of pornography, featuring minors. The term "child" is defined for this purpose by each country's child pornography laws, and these laws also set forth criteria to use in determining whether a particular depiction of a child is child pornography.
|
CONSUMER MARKETING |
|
Find CONSUMER MARKETING experts and consultants for CONSUMER MARKETING litigation support. Available to be CONSUMER MARKETING expert witnesses and provide CONSUMER MARKETING forensic consulting in CONSUMER MARKETING litigation, in addition prepare CONSUMER MARKETING expert witness reports for use in deposition and/or in-court trial testimony.
|
LAND FILL - WASTE DISPOSAL - GARBAGE DUMP |
|
Landfill is a waste disposal site for the deposit of the waste onto or into land (i.e., underground), including: internal waste disposal sites (i.e., landfill where a producer of waste is carrying out its own waste disposal at the place of production), and a permanent site (i.e., more than one year), which is used for temporary storage of waste, but excluding: transfer facilities where waste is unloaded in order to permit its preparation for further transport for recovery, treatment or disposal elsewhere, and storage of waste prior to recovery or treatment for a period less than three years as a general rule or storage of waste prior to disposal for period less than one year.
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
POLLUTION |
|
Pollution is the release of environmental contaminants. Carbon monoxide, sulfur dioxide, chlorofluorocarbons (CFCs), and nitrogen oxides produced by industry and motor vehicles are common air pollutants. Sunlight converts nitrogen oxides and hydrocarbons to ozone or smog. Water pollutants may consist of a wide range of organic and inorganic chemicals such as heavy metals, petrochemicals, chloroform, and bacteria. Water pollution may also occur in the form of thermal pollution and dissolved oxygen depletion. Soil contamination is an important aspect of environmental pollution; this phenomenon occurs when chemicals are released by spill or underground storage tank leakage. Among the most significant soil contaminants are hydrocarbons, heavy metals, MTBE, herbicides, pesticides and chlorinated hydrocarbons. The U.S., Russia, China and Japan are the world leaders in air pollution emissions; however, Canada is the number two country on a per capita basis.
|
WASTE DISPOSAL MANAGEMENT |
|
Waste management is the collection, transport, processing or disposal of waste materials, usually ones produced by human activity, in an effort to reduce their effect on human health or local aesthetics or amenity. A subfocus in recent decades has been to reduce waste materials' effect on the natural world and the environment and to recover resources from them.
|
|
