Found 36 load safety Experts and Expert Witnesses.
|
 |
|
|
| 25 years in the Mine Safety Industry
|
|
|
|
| Standards of care and custom practices of truck drivers and motor carriers. Over 35 years experience truck driver, safety supervisor, truck driver school operator, Testified in many states.
|
|
|
|
| 37 years in railroad operations, safety and government regulatory oversite. Expert witness, accident investigator, and DOT hazmat regulations specialist. Accident investigations.
|
|
|
|
| Former trucking company owner, Corportate Executive (Sr. V.P. Risk Management Director of Safety / Compliance) provides valuable insight, analysis & expert testimony in most any trucking related case.
|
|
|
|
| Qualified as an expert witness in civil and criminal courts.
Injury biomechanics in automotive crashes, aircraft crashes, elevator failures, sports impacts and slips and falls.
|
|
|
|
| Trucking and Distribution Expert, Accidents, Safety and Economic Regulation, Loss & Damage Claims,
|
|
|
|
| Paradise Crane Consultants (PCC) is the consultant of choice for safety and health in construction and industrial work environments. Throughout our history we have played a major role in the safety and health field. We have determined the causes of numerous incidents and accidents; conducted safety and health audits; and have worked closely with governmental regulatory agencies with regard to current and proposed safety and health legislation....
|
|
|
|
| Worked with approximately 40 law firms in approximately 20 states in the areas of the trucking industry.
|
|
|
|
| Industrial & Utility power generation and cogeneration expert. 30 years hands-on experience with plants from 100 kW to 1,000 MW. Extensive International experience arbitrations & litigations expert.
|
|
|
|
| 15 Years experience in operations, fueling, load supervision, crew briefing, notams, flight plans, safety, check-in, etc., Embraer and ground school with simulator for the ERJ. Reliablity analyst.
|
|
|
|
| Ph.D. Electric Power Engineering. MBA. PE in Calif, NY, Texas. Former utility manager. Licensed electrical contractor.
|
|
|
|
| Ph.D. Electric Power Engineering. MBA. PE in Calif, NY, Texas. Former utility manager. Licensed electrical contractor.
|
|
|
|
| EW #2835 is an expert in traffic accident reconstruction, vehicle safety standards, air bag and seat belt performance, and speed computations.
|
|
|
|
| Crane Inspection Services, Inc. is accredited by OSHA to inspect, test, and issue documents of certification, when required, on shore-based material-handling devices, floating cranes.
|
|
|
|
| EW #13924 is a USCG Unlimited Master and Pilot for Southeast Alaska. He has over 20 years experience in the maritime industry.
|
|
|
|
| 20 yrs trucking safety. Former Vice President of Safety+ Recruiting, HR, Risk Management. Qualified expert in negligent entrustment and unloading cases in both State and Federal courts.
|
|
|
|
| 35 years expertise in marine claims, litigation support, and expert services.
|
|
|
|
| Experts in construction, accidents, dispute resolution, claims, scheduling, delays, defects, standards of care, estimating, OSHA investigations, and litigation support.
|
|
|
|
| CRAFT Forensic Services personnel have extensive training and experience with material handling equipment and are formally trained in the component technologies of material handling equipment designs.
|
|
|
|
| 25 years of experience in the mechanical design and analysis of structures, machinery, and facilities.
|
|
|
|
| Expert Witness on motor carrier safety & compliance w/ emphasis on FMCSR, selection & retention of drivers, driver training, motor carrier driver accident avoidance, driver's logs, etc.
|
|
|
|
| Maritime surveyor & consultant since 1982 working for: shipping, petroleum, chemical, commodity-trading & insurance interests. Assists admiralty & commercial law firms on a regular basis.
|
|
|
|
| 40+ Years experience as a Mechanical Engineer dealing with all manner of machinery and vehicles.
|
|
|
|
| Provides mechanical engineering support in accident investigation and reconstruction covering failure analysis, process simulation, equipment reliability and safety. Specialized in areas of cranes, rigging, industrial forklifts, aerial devices, conveyors, and barges. Cover OSHA, State OSHA, ANSI/ASME B30, HST, CMAA, ASME B31.1 and B31.3....
|
|
|
|
| EW #13691 is an expert in the standards of care and custom practices of truck drivers and motor carriers for over 35 years, and has testified in many states.
|
|
|
|
| EW #990 is a Superior Court-Certified Expert Witness, and has worked for Plaintiffs and Defendants, in cases involving Gangs; School Safety; and Child Abuse/Mandated Reporting.
|
|
|
|
| Over 20 years experience in/with Internet, Computers, Programming, Data Processing, Dating and Social Networking, Community Portals, Engineering, Business Development.
|
|
|
|
| Providing over 30 years of Experience and Training to the Commercial Transportation Industry
|
|
|
|
| We specialise in working at height, industrial access solutions, inspection and testing of structures and structural elements, preparation of specifications supervision and planning.
|
|
|
|
| Product Safety Expert with such products as Ladders, Windows, Doors, Awnings, Mobile Homes, etc.
|
|
|
|
| US Coast Guard Licensed Chief Engineer and Third Mate. Accredited Marine Surveyor. Expert in the causes/prevention of maritime casualties and accidents.
|
|
|
|
| EW #3035 is a certified Motor Vehicle Accident Reconstruction & Cause Analysis professional providing service to law firms and insurance companies that require accident reconstruction for use in civil litigation....
|
|
|
|
| Over 25 years of experience in the fitness & sport equipment industries, including Forensic Litigation Support Consulting.
|
|
|
|
| Licensed Professional Engineer (Florida) with over 23 years of electric utility experience including power engineering, data/telecommunications and electrical/ fire accident forensic investigation.
|
|
|
|
| A leading expert in marine operations and safety, is actively employed as master of offshore O/G industry support vessels in Gulf of Mexico/internationally.
|
|
|
|
| Mechanical and marine engineer-underwater equipment/materials, fiber optics, high-tension cables, machine design, theme park equipment/amusement rides, elastomers, fracture mechanics concrete and rock
|
|
|
|
| Looking for a load safety expert?
|
|
|
Find Load Safety experts and consultants for Load Safety litigation support at www.expertwitness.com. Available to be Load Safety expert witnesses and provide Load Safety forensic consulting in Load Safety litigation, in addition prepare Load Safety expert witness reports for use in deposition and/or in-court trial testimony.
|
Categories To Find "Load Safety" Experts:
|
DOORS AND GATES |
|
A door is a generally floor-length opening in a wall (or other partition), often equipped with a hinged or sliding panel which can be moved to leave the opening accessible, or to close it more or less securely. Doors are nearly universal in structures of all kinds (especially houses and other buildings), allowing passage between inside and outside, or among internal rooms. Doors are also found in vehicles, cupboards, cages, etc. A gate is a point of entry to a space enclosed by walls, or an opening in a fence. Gates may prevent or control entry or exit, or they may be merely decorative.
|
DUMBWAITER |
|
A small elevator used to transport food or other items between floors of a building.
An elevator is a transport device used to move goods or people vertically. Outside North America, elevators are known more commonly as lifts, although the word elevator is familiar from American movies and television shows, just as some Americans are aware of lift from imported entertainment. Other languages may have loanwords based on either elevator (e.g. Japanese) or lift (e.g. Cantonese). Because of wheelchair access laws, elevators are often a requirement in new buildings with multiple floors.
|
DUST CONTROL |
|
Dust consists of tiny solid particles carried by air currents. These articles are formed by a disintegration or fracture process, such as grinding, crushing, or impact. The Mine Safety and Health Administration (MSHA) defines dust as finely divided solids that may become airborne from the original state without any chemical or physical change other than fracture.
|
ELEVATOR |
|
An elevator is a transport device used to move goods or people vertically. Outside North America, elevators are known more commonly as lifts, although the word elevator is familiar from American movies and television shows, just as some Americans are aware of lift from imported entertainment. Other languages may have loanwords based on either elevator (e.g. Japanese) or lift (e.g. Cantonese). Because of wheelchair access laws, elevators are often a requirement in new buildings with multiple floors.
|
ENGINEERING - AUTOMATION |
|
Automation (ancient Greek: = self dictated) or industrial automation or numerical control is the use of control systems such as computers to control industrial machinery and processes, replacing human operators. In the scope of industrialization, it is a step beyond mechanization, where human operators are provided with machinery to assist them with the physical requirements of work.
|
ENGINEERING - STRUCTURAL |
|
Structural engineering is the field of civil engineering particularly concerned with the design of complex structural systems. In a practical sense, structural engineering is largely the application of Newtonian mechanics to the design of structural elements and systems: such as buildings, bridges, walls (including retaining walls), dams, tunnels, etc.
|
ERGONOMICS |
|
Ergonomics (or human factors) is the scientific discipline concerned with the understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, data, and methods to design in order to optimize human well-being and overall system performance (definition adopted by the International Ergonomics Association in 2000).
|
FIRE PROTECTION & SUPPRESSION SYSTEMS |
|
Fire protection and suppression systems are now a requirement for all public buildings for the protection safety of people. Every State and City has a strict set of Fire Codes that all buildings must meet.
Fire sprinklers are an active fire protection measure subject to stringent bounding. They are connected to a fire suppression system that consists of overhead pipes fitted with sprinkler heads throughout the coverage area. Fire sprinkler systems for high-rises are usually also equipped with a fire pump, and a jockey pump and are tied into the fire alarm system. Although historically only used in factories and large commercial buildings, home and small building systems are now available at a relatively cost-effective price.
Fire suppression systems are used in conjunction with smoke detectors and fire alarm systems to improve and increase public safety
|
FORKLIFTS - FORK LIFTS TRUCKS |
|
A forklift truck (often just called forklift) is a powered industrial truck used to lift and transport materials by means of steel forks inserted under the load. The forklift was developed in the 1920s by various companies including the transmission manufacturing company Clark (today known as Clark Material Handling Company) and the hoist company Yale & Towne Manufacturing (Today known as Yale Materials Handling Corporation)[1]. It has since become an indispensable piece of equipment in many manufacturing and warehousing operations. A different type of forklift is the sideloader (i.e Fiora sideloader)[2], usually designed to transport long loads in very narrow aisle (VNA trucks).
|
HELICOPTERS |
|
A helicopter is an aircraft which is lifted and propelled by one or more horizontal rotors (propellers). Helicopters are classified as rotary-wing aircraft to distinguish them from conventional fixed-wing aircraft. The word helicopter is derived from the Greek words helix (spiral) and pteron (wing). The engine-driven helicopter was invented by the Slovak inventor Jan Bahyl. The first stable, single-rotor, fully-controllable helicopter to enter large full-scale production was made by Igor Sikorsky in 1942.
|
INDUSTRIAL AUTOMATION |
|
Automation (ancient Greek: = self dictated) or industrial automation or numerical control is the use of control systems such as computers to control industrial machinery and processes, replacing human operators. In the scope of industrialization, it is a step beyond mechanization. Whereas mechanization provided human operators with machinery to assist them with the physical requirements of work, automation greatly reduces the need for human sensory and mental requirements as well.
|
LAND FILL - WASTE DISPOSAL - GARBAGE DUMP |
|
Landfill is a waste disposal site for the deposit of the waste onto or into land (i.e., underground), including: internal waste disposal sites (i.e., landfill where a producer of waste is carrying out its own waste disposal at the place of production), and a permanent site (i.e., more than one year), which is used for temporary storage of waste, but excluding: transfer facilities where waste is unloaded in order to permit its preparation for further transport for recovery, treatment or disposal elsewhere, and storage of waste prior to recovery or treatment for a period less than three years as a general rule or storage of waste prior to disposal for period less than one year.
|
LIFTING EQUIPMENT |
|
A mechanical jack is a device which lifts heavy equipment. The most common form is a car jack which lifts vehicles so that maintenance can be performed. Car jacks usually use mechanical advantage to allow a human to lift a vehicle. More powerful jacks use hydraulic power to provide more lift over greater distances. A mechanical jack is called a Floor Jack or a Garage Jack. A three ton jack is good around the Shop or the DIYer's Garage. The higher the jack's ton rating the better, a three ton jack will raise an automotive more than the 2 1/2 jack.
|
LIQUIFIED NATURAL GAS - LNG |
|
Liquefied natural gas or LNG is natural gas that has been processed to remove impurities and heavy hydrocarbons and then condensed into a liquid at atmospheric pressure by cooling it to approximately -163 degrees Celsius. LNG is transported by specially designed vessels and stored in specially designed tanks. LNG is about 1/600th the volume of natural gas at standard temperature and pressure (STP), making it much more cost-efficient to transport over long distances where pipelines do not exist. Where moving natural gas by pipelines is not possible or economical, it can be transported by LNG vessels, where the most common tank types are membrane(prismatic) or Moss Rosenberg(spheres).
|
LOADING DOCKS |
|
A loading dock is an architectural fixture where trucks may be loaded and unloaded. They are commonly found on large commercial and industrial buildings.
Warehouses that handle palletized freight use a dock leveler so items can be easily loaded and unloaded using power moving equipment (e.g. a forklift). When a truck backs into such a loading dock, the bumpers on the loading dock and the bumpers on the trailer come into contact and create a gap; also, the warehouse floor and the trailer deck may not be horizontally aligned. The most common dock height is 48 52, though heights of up to 55" occur as well. A dock leveler bridges the gap between a truck and a warehouse to accommodate a forklift.
|
MEDICAL |
|
Medical - Having to do with or anything pertaining to Medical treatment, Medical Malpractice, Medical review, Medical Litigation.
Find MEDICAL experts and consultants for MEDICAL litigation support. Available to be MEDICAL expert witnesses and provide MEDICAL forensic consulting in MEDICAL litigation, in addition prepare MEDICAL expert witness reports for use in deposition and/or in-court trial testimony.
|
MICROWAVE HEATING |
|
A microwave oven, or microwave, is a kitchen appliance employing microwave radiation primarily to cook or heat food. Microwave ovens have revolutionized cooking since their use became widespread in the 1970s.
|
NURSING HOMES - GERIATRICS |
|
A nursing home or skilled nursing facility (SNF) is a place of residence for people who require constant nursing care and have significant Activity of Daily Living (ADL) deficiencies. Residents include the elderly and younger adults with physical disabilities. Adults 18 or older can stay in a skilled nursing facility to receive physical, occupational, and other rehabilitative therapies following an accident or illness. In the US, nursing homes are required to have a licensed nurse on duty 24 hours a day, and during at least one shift each day, one of those nurses must be a Registered Nurse. In April, 2005 there were a total of 16,094 nursing homes in the United States, down from 16,516 in December, 2002. Some states have nursing homes that are considered NF or nursing facility......these homes do not have beds certified for Medicare patients, but can only treat patients whose payments source is Private Pay or Medicaid.
|
POLLUTION |
|
Pollution is the release of environmental contaminants. Carbon monoxide, sulfur dioxide, chlorofluorocarbons (CFCs), and nitrogen oxides produced by industry and motor vehicles are common air pollutants. Sunlight converts nitrogen oxides and hydrocarbons to ozone or smog. Water pollutants may consist of a wide range of organic and inorganic chemicals such as heavy metals, petrochemicals, chloroform, and bacteria. Water pollution may also occur in the form of thermal pollution and dissolved oxygen depletion. Soil contamination is an important aspect of environmental pollution; this phenomenon occurs when chemicals are released by spill or underground storage tank leakage. Among the most significant soil contaminants are hydrocarbons, heavy metals, MTBE, herbicides, pesticides and chlorinated hydrocarbons. The U.S., Russia, China and Japan are the world leaders in air pollution emissions; however, Canada is the number two country on a per capita basis.
|
POWER PLANTS |
|
A fossil fuel power plant is an energy conversion center that combusts fossil fuels to produce electricity, designed on a large scale for continuous operation.
|
STRESS ANALYSIS |
|
Stress analysis is an engineering discipline that determines the stress in materials and structures subjected to static or dynamic forces or loads (see statics and dynamics). The aim of the analysis is usually to determine whether the element or collection of elements, usually referred to as a structure, can safely withstand the specified forces. This is achieved when the determined stress from the applied force(s) is less than the ultimate tensile strength or ultimate compressive strength the material is known to be able to withstand, though ordinarily a safety factor is applied in design.
|
TECHNOLOGY |
|
Technology is a word with origins in the Greek "technologia" ("τεχνολογία") "techne", "τέχ& | | |
