ACCOUNTING / BOOKKEEPING / CPAs |
|
Accountancy (profession) or accounting (methodology) is the measurement, disclosure or provision of assurance about information that helps managers and other decision makers make resource allocation decisions. Financial accounting is one branch of accounting and historically has involved processes by which financial information about a business is recorded, classified, summarized, interpreted, and communicated. Auditing, a related but separate discipline, is the process whereby an independent auditor examines an organizations financial statements in order to express an opinion -- that conveys reasonable but not absolute assurance -- as to the fairness and adherence to generally accepted accounting principles, in all material respects.
|
BOILERS |
|
A boiler is a closed vessel in which water or other fluid is heated under pressure. The steam or hot fluid is then circulated out of the boiler for use in various process or heating applications. A safety valve is required to prevent over pressurisation and possible explosion of a boiler.
|
BUILDING INSPECTION |
|
Construction and building inspectors examine buildings, highways and streets, sewer and water systems, dams, bridges, and other structures to ensure that their construction, alteration, or repair complies with building codes and ordinances, zoning regulations, and contract specifications. Building codes and standards are the primary means by which building construction is regulated in the United States for the health and safety of the general public. National model building codes are published by the International Code Council (ICC), although many localities have additional ordinances and codes that modify or add to the National model codes. To monitor compliance with regulations, inspectors make an initial inspection during the first phase of construction and follow up with further inspections throughout the construction project. However, no inspection is ever exactly the same. In areas where certain types of severe weather or natural disasterssuch as earthquakes or hurricanesare more common, inspectors monitor compliance with additional safety regulations designed to protect structures and occupants during those events.
|
COMBUSTION |
|
Combustion or burning is a chemical process, an exothermic reaction between a substance (the fuel) and a gas (the oxidizer), usually O2, to release heat. In a complete combustion reaction, a compound reacts with an oxidizing element, and the products are compounds of each element in the fuel with the oxidizing element. For example:
CH4 + 2 O2 → CO2 + 2 2O + heat
CH2S + 6 F2 → CF4 + 2 HF + SF6 + heat
|
CORROSION EVALUATIONS |
|
Corrosion is deterioration of intrinsic properties in a material due to reactions with its environment. Weakening of steel due to oxidation of the iron atoms is a well-known example of electrochemical corrosion. This type of damage usually affects metallic materials, and typically produces oxide(s) and/or salt(s) of the original metal. Corrosion also includes the dissolution of ceramic materials and can refer to discoloration and weakening of polymers by the sun's ultraviolet light.
|
FIBER OPTICS |
|
An optical fiber (or fibre) is a transparent thin fiber, usually made of glass or plastic, for transmitting light. Fiber optics is the branch of science and engineering concerned with such optical fibers.
Optical fibers are commonly used in telecommunication systems, as well as in illumination, sensors, and imaging optics.
|
HELICOPTERS |
|
A helicopter is an aircraft which is lifted and propelled by one or more horizontal rotors (propellers). Helicopters are classified as rotary-wing aircraft to distinguish them from conventional fixed-wing aircraft. The word helicopter is derived from the Greek words helix (spiral) and pteron (wing). The engine-driven helicopter was invented by the Slovak inventor Jan Bahyl. The first stable, single-rotor, fully-controllable helicopter to enter large full-scale production was made by Igor Sikorsky in 1942.
|
INDUSTRIAL VENTILATION |
|
Ventilation is movement of air, typically between an indoor space and the outside. When people or animals are present, ventilation is especially necessary to evacuate the carbon dioxide produced and renew the oxygen used up. It is also needed to remove other pollutants (smoke, chemicals, etc.) from the space. Ventilation air can also be used to heat, cool, humidify and dehumidify the space and to filter particles or contaminants from the air.
|
LAND FILL - WASTE DISPOSAL - GARBAGE DUMP |
|
Landfill is a waste disposal site for the deposit of the waste onto or into land (i.e., underground), including: internal waste disposal sites (i.e., landfill where a producer of waste is carrying out its own waste disposal at the place of production), and a permanent site (i.e., more than one year), which is used for temporary storage of waste, but excluding: transfer facilities where waste is unloaded in order to permit its preparation for further transport for recovery, treatment or disposal elsewhere, and storage of waste prior to recovery or treatment for a period less than three years as a general rule or storage of waste prior to disposal for period less than one year.
|
LIQUIFIED NATURAL GAS - LNG |
|
Liquefied natural gas or LNG is natural gas that has been processed to remove impurities and heavy hydrocarbons and then condensed into a liquid at atmospheric pressure by cooling it to approximately -163 degrees Celsius. LNG is transported by specially designed vessels and stored in specially designed tanks. LNG is about 1/600th the volume of natural gas at standard temperature and pressure (STP), making it much more cost-efficient to transport over long distances where pipelines do not exist. Where moving natural gas by pipelines is not possible or economical, it can be transported by LNG vessels, where the most common tank types are membrane(prismatic) or Moss Rosenberg(spheres).
|
LIQUIFIED PETROLEUM GAS - LPG - LP GAS |
|
Liquified petroleum gas (also called liquefied petroleum gas, liquid petroleum gas, LPG, LP Gas, or autogas) is a mixture of hydrocarbon gases used as a fuel in heating appliances and vehicles, and increasingly replacing chlorofluorocarbons as an aerosol propellant and a refrigerant to reduce damage to the ozone layer. Varieties of LPG bought and sold include mixes that are primarily propane, mixes that are primarily butane, and mixes including both propane and butane, depending on the seasonin winter more propane, in summer more butane. Propylene and butylenes are usually also present in small concentration. A powerful odorant, ethanethiol, is added so that leaks can be detected easily. LPG is manufactured during the refining of crude oil, or extracted from oil or gas streams as they emerge from the ground.
|
MICROWAVE HEATING |
|
A microwave oven, or microwave, is a kitchen appliance employing microwave radiation primarily to cook or heat food. Microwave ovens have revolutionized cooking since their use became widespread in the 1970s.
|
MINERALS, OIL, GAS |
|
Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, fuel oil is any liquid petroleum product that is burned in a furnace for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (about 100 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. Factually and in a stricter sense, the term fuel oil is used to indicate the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha.
|
PAINT |
|
Paint is the general term for a family of products used to protect and add color to an object or surface by covering it with a pigmented coating. As a verb, painting is the application of paint. One who paints is called a painter.
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
POLLUTION |
|
Pollution is the release of environmental contaminants. Carbon monoxide, sulfur dioxide, chlorofluorocarbons (CFCs), and nitrogen oxides produced by industry and motor vehicles are common air pollutants. Sunlight converts nitrogen oxides and hydrocarbons to ozone or smog. Water pollutants may consist of a wide range of organic and inorganic chemicals such as heavy metals, petrochemicals, chloroform, and bacteria. Water pollution may also occur in the form of thermal pollution and dissolved oxygen depletion. Soil contamination is an important aspect of environmental pollution; this phenomenon occurs when chemicals are released by spill or underground storage tank leakage. Among the most significant soil contaminants are hydrocarbons, heavy metals, MTBE, herbicides, pesticides and chlorinated hydrocarbons. The U.S., Russia, China and Japan are the world leaders in air pollution emissions; however, Canada is the number two country on a per capita basis.
|
POWER PLANTS |
|
A fossil fuel power plant is an energy conversion center that combusts fossil fuels to produce electricity, designed on a large scale for continuous operation.
|
TRANSPORTATION |
|
Transport or transportation is the movement of people and goods from one place to another.
|
WELL LOG INTERPRETATION |
|
Well logging is a technique used in the oil and gas industry for recording rock and fluid properties to find hydrocarbon zones in the geological formations below the Earths crust. A logging procedure consists of lowering a logging tool on the end of a wireline into an oil well (or hole) to measure the rock and fluid properties of the formation. An interpretation of these measurements is then made to locate and quantify potential depth zones containing oil and gas (hydrocarbons). Logging tools developed over the years measure the electrical, acoustic, radioactive, electromagnetic, and other properties of the rocks and their contained fluids. Logging is usually performed as the logging tools are pulled out of the hole. This data is recorded to a printed record called a Well Log and is normally transmitted digitally to office locations. Well logging is performed at various intervals during the drilling of the well and when the total depth is drilled, which could range in depths from 300 m to 8000 m (1000 ft to 25,000 ft) or more.
|
|
