ENGINEERING - INSTRUMENTATION |
|
Instrumentation Engineering is a discipline relying on connecting multiple disciplines of engineering.
Measurement and controls, the two facets of instrumentation, have brought technology to an unprecedented degree of precision. Instrumentation enables the measurement of various variables such as flow and pressure. Control works to keep these variables at a desired level of safe, economic and other constrained values. Instrument engineers usually have degrees in chemical engineering, electrical engineering, or mechanical engineering and sometimes in the newer field of control systems engineering.
|
WELL LOG INTERPRETATION |
|
Well logging is a technique used in the oil and gas industry for recording rock and fluid properties to find hydrocarbon zones in the geological formations below the Earths crust. A logging procedure consists of lowering a logging tool on the end of a wireline into an oil well (or hole) to measure the rock and fluid properties of the formation. An interpretation of these measurements is then made to locate and quantify potential depth zones containing oil and gas (hydrocarbons). Logging tools developed over the years measure the electrical, acoustic, radioactive, electromagnetic, and other properties of the rocks and their contained fluids. Logging is usually performed as the logging tools are pulled out of the hole. This data is recorded to a printed record called a Well Log and is normally transmitted digitally to office locations. Well logging is performed at various intervals during the drilling of the well and when the total depth is drilled, which could range in depths from 300 m to 8000 m (1000 ft to 25,000 ft) or more.
|
|
