|
|
| EW #2719 properly investigates and authoritatively answers questions about the design, installation and performance of concrete and related materials of construction.
|
 |
|
|
| Qualified as an expert witness in civil and criminal courts.
Injury biomechanics in automotive crashes, aircraft crashes, elevator failures, sports impacts and slips and falls.
|
|
|
|
| EW #1459 BS, CFEI is a proven professional in the evaluation and investigation of vehicle related injuries and defects.
|
|
|
|
| Engineer with appliance, automotive, lighting experience. Consumer clothes dryer, microwave oven and fluorescent lighting experience. UL, AGA, and other agency experience.
|
|
|
|
| Principal of firm established to provide independent investigation and expert testimony utilizing over 45 years of professional experience in mechanical and safety engineering, research, inspection and testing. Primarily involved with studying performance, determining defects, reconstructing accidents, evaluating construction, analyzing failures, discovering hazards, confirming intended use, misuse, abuse and/or safety violations in Consumer Products, Industrial Equipment, Construction Materials...
|
|
|
|
| EW #2234 provides assistance on-site, anywhere, anytime, in performing: ***[***[Engineering]****]**** Investigations, Reliability and Failure Analysis, General ***[***[Engineering]****]**** and Legal Assistance....
|
|
|
|
| Former trucking company owner, Corportate Executive (Sr. V.P. Risk Management Director of Safety / Compliance) provides valuable insight, analysis & expert testimony in most any trucking related case.
|
|
|
|
| Consulting and forensic engineering services. Issues addressed include all aspects of the design, fabrication, production and operation of electrical and electronic devices and products.
|
|
|
|
| Industrial & Utility power generation and cogeneration expert. 30 years hands-on experience with plants from 100 kW to 1,000 MW. Extensive International experience arbitrations & litigations expert.
|
|
|
|
| EW #13769 specializes in biomechanical analysis, testing and design. He has many years of academic biomechanics experience and served as an expert witness in injury and medical device failure cases.
|
|
|
|
| Expertise in electrical devices and electronics technology.
|
|
|
|
| we provide litigation consulting and comprehensive forensic civil engineering expert services necessary for supporting legal actions and subsequent mitigations.If you are an attorney or an individual in need of experienced, diligent, consistent, and detail-oriented civil engineering experts, at Expert Engineering Witnesses, we can help you. We provide our services nationwide with an emphasis on the western states....
|
|
|
|
| Gerald Spencer is a Registered Professional Mechanical and Electrical Engineer providing expert Engineering Design Services and/or Legal Expert Witness services related to HVAC; I have been a multidiscipline project manager for the past 30 years. I am also the Mechanical and Electrical designer and the engineer....
|
|
|
|
| Established in 1946, maintains over a fifty-year history of delivering outstanding quality in structural engineering design.
|
|
|
|
| 25 years internationally recognized expertise in the area of railway track and structures, railway operations, and maintenance.
|
|
|
|
| CLE Engineering began it operation in 1987.
|
|
|
|
| Structures, Biomechanics and Safety Expert, Retired Senior Scientist, Columbia University
|
|
|
|
| Practicing geotechnical engineering since 1973, an expert consultant on more difficult geotechnical engineering projects.
|
|
|
|
| 25 years of experience in the mechanical design and analysis of structures, machinery, and facilities.
|
|
|
|
| 45 years providing forensic engineering and expert witness services to insurance and legal communities.
|
|
|
|
| 36+ years of experience with railroad metallurgical problems associated with component and car serviceability and failures.
|
|
|
|
| 35 years experience in design and evaluation of residential and comercial foundations and structures, water penetration, drainage and pavements. Extensive forensic and expert testimony experience.
|
|
|
|
| We have 18 year experience in structural design, analysis, peer review, construction damage assessment to structures, Forensic structural engineering, structural recertification, Threshold Insepctions
|
|
|
|
| Having over 30 years experience in geological, seismological and forensic studies.
|
|
|
|
| Recognized worldwide as premier provider of engineering and management consulting services to the engineering, legal, regulatory, industrial, commercial and construction sectors.
|
|
|
|
| Registered Professional Engineer with expertise in concrete and corrosion. Available in the United States and Canada.
|
|
|
|
| Over 30 years of experience in Mechanical / Structural Engineering. Involved in several litigation cases utilizing Technical Expertise.
|
|
|
|
| Mechanical engineering consultant specializing in the analysis and determination of the causes of failures or accidents involving mechanical engineering disciplines. Provide expert testimony.
|
|
|
|
| EW #2714 offers Consulting services to the legal community and others, in the areas of accident investigation and reconstruction.
|
|
|
|
| 19 years as a consultant in the field of plastic processing, 40 years experience in developing polymer defect technology, 15 years in developing the field of plastic and polymer coefficient of friction related to the feed section of the extruder....
|
|
|
|
| Accident Reconstruction; Bicycle Accidents; Trucks; Pedestrian Accidents; Time/Distance/Speed Analysis; ACTAR Accredited, Evidence Documentation; Graphic Illustrations
|
|
|
|
| Over 26 years of technical expertise and professional work in the prevention of lead poisoning.
|
|
|
|
| 20 years experience Single Joint Expert Service, Construction, Structural, Safety Personal Injury.
|
|
|
|
| Coming Soon
|
|
|
|
| Ph.D.- Computer Science, Stanford U.; over 30 years in computer systems, software, input/output, and hard disk; experience with Intel, Microsoft and many others; neutral advisor to two federal judges.
|
|
|
|
| 35 years of combined engineering, inspection, construction supervision, and construction management
|
|
|
|
| Specializing in fire investigation fire protection full scale fire testing safety issues expert testimony litigation support
|
|
|
|
| 35 years of experience in Construction Management of industrial and commercial projects.
|
|
|
|
| Provides mechanical engineering support in accident investigation and reconstruction covering failure analysis, process simulation, equipment reliability and safety. Specialized in areas of cranes, rigging, industrial forklifts, aerial devices, conveyors, and barges. Cover OSHA, State OSHA, ANSI/ASME B30, HST, CMAA, ASME B31.1 and B31.3....
|
|
|
|
| NY firm on glass, ceramic fracture, failure, safety. Expert witness, consulting on, stress analysis, manufacturing, tempering, and defect elimination, polarimetry, SIGU design , and laminated glass.
|
|
|
|
| Over 20 years experience in/with Internet, Computers, Programming, Data Processing, Dating and Social Networking, Community Portals, Engineering, Business Development.
|
|
|
|
| 30 Yr. Water Utility Construction, Operation, and Maintenance.
Additional general construction management and claims experience.
Professional Engineer with Masters in Business Administration.
|
|
|
|
| Recognized worldwide premier provider of engineering and management consulting services to the engineering, legal, regulatory, industrial, commercial and construction sectors.
|
|
|
|
| Highly regarded independent Engineering Materials Consultancy. Investigations into wide range of incidents including litigations & personal injury. Supported by in-house UKAS accreditied laboratories.
|
|
|
|
| Licensed Professional Engineer (Florida) with over 23 years of electric utility experience including power engineering, data/telecommunications and electrical/ fire accident forensic investigation.
|
|
|
|
| 24 years experience in consulting, marketing, business development, strategic planning, product development, application development, technical services, R&D, and management.
|
|
|
|
| Expert witness for Aircraft engine and Automotive structural issues Experience at GE Aircraft Engines, GE Power Systems and GE Research Center,Instron and Rolls-Royce.
|
|
|
|
| Expert witness for aircraft appraisals including retrospective as well as current fair market values. For the legal profession, AAI will provide very detailed, USPAP/NAAA certified appraisals.
|
|
|
|
| 30 years of management and hands-on experience, a full service construction and environmental consulting firm with offices in California and Arizona.
|
|
|
|
| 10 years as Facility Engineer for Department of Defense
|
|
|
|
| Internationally recognized scientist in river geomorphology, flood hydrology, and floodplain management, including research on natural and human impacts upon flood hazard. Consulting and EW testimony.
|
|
|
|
| EW #1214 specializes in investigations of polymers, metals, ceramics and other areas of materials.
|
|
|
|
| I am a highly experience dam designer with over 35 years experience with design of small dams.
|
|
|
|
| CRAFT Forensic Services personnel have extensive training and experience with material handling equipment and are formally trained in the component technologies of material handling equipment designs.
|
|
|
|
| Experts that have investigated hundreds of accidents, failures, and claims occurring in several states and Canada.
|
|
|
|
| Over 40 years experience in towing vessel operations, marine construction and salvage: marine surveying and brokerage.
|
|
|
|
| A highly experienced engineering consulting firm, we provide analysis services in a broad range of industries.
|
|
|
|
| Seasoned investment professional highly experienced in public/private capital markets, asset allocation, risk analysis and governance issues. Experienced NASD Arbitrator.
|
|
|
|
| EW #635 His experience includes Expert Determination as well as acting as an Expert appointed by Tribunals or by parties in arbitration and litigation.
|
|
|
|
| Provides for the needs of it's clients by offering the highest quality engineering, geologic and testing services available in the geotechnical industry.
|
|
|
|
| Qualified experts in toxic exposure cases since 1979. Asbestos-Industrial Hygiene-Environmental
|
|
|
|
| Over 25 years of industrial experience and working with attornies and insurance companies in the areas of product liability, failure analysis, patent disputes and glass fracture.
|
|
|
|
| Over 25 years of industrial experience and working with attornies and insurance companies in the areas of product liability, failure analysis, patent disputes and glass fracture.
|
|
|
|
| Performs metallurgical failure analysis and appears in court as an expert witness.
|
|
|
