Found 10 vinyl Experts and Expert Witnesses.
|
 |
|
|
| Risk & Causation for Environmental/Occupational Health, Chemical/Biological Exposure, Toxicology & Epidemiology. Board Certified Toxicologist.
|
|
|
|
| 30 years experience in chemical exposures that affect human health and welfare. He is a Board-Certified Toxicologist with a Ph.D. in Environmental Toxicology and Licenced Professional Engineer.
|
|
|
|
| Risk & Causation for Environmental/Occupational Health, Chemical/Biological Exposure, Toxicology & Epidemiology. Board Certified Toxicologist.
|
|
|
|
| Bodycote Polymer is a materials technology consulting firm and laboratory specializing in failure analysis of plastic components and products, polymer analysis, and product development.
|
|
|
|
| EW #8254 has over 30 years experience as a scientist in Dow Plastics. He is globally recognized as a plastics expert.
|
|
|
|
| We are your source for plastic testing and polymer consulting.
|
|
|
|
| Board Certified Forensic Examiners and Forensic Engineers-Technologists in floor failure analysis, slip, trip and fall causation. Floor covering industry expert in materials and design of remediation.
|
|
|
|
| Statewide Inspection Service is professionally trained and certified to render expert opinions on flooring related problems.
|
|
|
|
| Board Certified Toxicologist, Expert on Causation, Occupational and Environmental Toxicology, Technical Management of Mass Toxic Tort Litigation, Medical Evaluation and Health Survey Team
|
|
|
|
| Audio Restoration, Voice ID, Audio Authentication, Video Clairification, Video Authentication, Video Identification, CV Available on request. Free phone consultation 248-320-8282
|
|
|
|
| Looking for a vinyl expert?
|
|
|
Find Vinyl experts and consultants for Vinyl litigation support at www.expertwitness.com. Available to be Vinyl expert witnesses and provide Vinyl forensic consulting in Vinyl litigation, in addition prepare Vinyl expert witness reports for use in deposition and/or in-court trial testimony.
|
Categories To Find "Vinyl" Experts:
|
ADHESIVES |
|
An adhesive is a compound that adheres or bonds two items together. Adhesives may come from either natural or synthetic sources. Some modern adhesives are extremely strong, and are becoming increasingly important in modern construction and industry.
|
ASBESTOS |
|
Asbestos (a misapplication of Latin: asbestos "quicklime" from Greek ἄσβεστος: a-, "not"; sbestos, "extinguishable") describes any of a group of fibrous metamorphic minerals of the hydrous magnesium silicate variety. The name is derived for its historical use in lamp wicks; the resistance of asbestos to fire has long been exploited for a variety of purposes. It was used in fabrics such as Egyptian burial cloths and Charlemagne's tablecloth, which, according to legend, he threw in a fire to clean. Asbestos occurs naturally in many forms (see below); it is mined from metamorphic deposits.
|
COATINGS |
|
A coating is a covering that is applied to an object to protect it or change its appearance. They may be applied as liquids, gases or solids.
Examples of coatings:
Anodizing
Chemical vapor deposition and physical vapor deposition
Chromate conversion coating
Enamel (paint)
Industrial coating
Oxide (coating)
Paint
Plasma coatings
Electroless plating or electrochemical plating
Phosphate (coating)
Polymer coatings, such as Teflon
Sputtered or vacuum deposited materials
Plate steel is often ordered from the mill pickled and oiled)
Enamel (vitreous)
Fusion bonded epoxy coating (FBE coating)
|
CORROSION EVALUATIONS |
|
Corrosion is deterioration of intrinsic properties in a material due to reactions with its environment. Weakening of steel due to oxidation of the iron atoms is a well-known example of electrochemical corrosion. This type of damage usually affects metallic materials, and typically produces oxide(s) and/or salt(s) of the original metal. Corrosion also includes the dissolution of ceramic materials and can refer to discoloration and weakening of polymers by the sun's ultraviolet light.
|
DOORS AND GATES |
|
A door is a generally floor-length opening in a wall (or other partition), often equipped with a hinged or sliding panel which can be moved to leave the opening accessible, or to close it more or less securely. Doors are nearly universal in structures of all kinds (especially houses and other buildings), allowing passage between inside and outside, or among internal rooms. Doors are also found in vehicles, cupboards, cages, etc. A gate is a point of entry to a space enclosed by walls, or an opening in a fence. Gates may prevent or control entry or exit, or they may be merely decorative.
|
FLOOR COVERING |
|
Flooring is the general term for a permanent covering of a floor. It is usually used to mean parquetry, but it can also refer to carpets, laminate flooring, raised flooring, and linoleum. Most wooden floors are made out of hard woods to prevent denting though most people today have carpets.
Floor covering selection, installation, repair, accident prevention, slip and fall information.
|
GRAPHICS |
|
Graphics are visual presentations on some surface such as a wall, canvas, computer screen, paper or stone to inform, illustrate or entertain. Examples are photographs, drawings, Line Art, graphs, diagrams, symbols, geometric designs, maps, engineering drawings, or other images which are not only text. Graphics is often used in combination with text and color.
|
HVAC - HEAT VENTITATION AIR CONDITIONING |
|
HVAC (pronounced either "H-V-A-C" or, occasionally, "H-VAK") is an initialism/acronym that stands for "heating, ventilation and air-conditioning". This is sometimes referred to as climate control.
These three functions are closely interrelated, as they control the temperature and humidity of the air within a building in addition to providing for smoke control, maintaining pressure relationships between spaces, and providing fresh air for occupants. In modern building designs, the design, installation and control systems of these functions are integrated into a single "HVAC" system.
The term air handler can mean a whole unit including the blower, heating and cooling elements, filter racks or chamber and dampers, but not including the ductwork through the building.
|
PLASTICS |
|
Plastic covers a range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics. There are few natural polymers generally considered to be "plastics". Plastics can be formed into objects or films or fibers. Their name is derived from the fact that many are malleable, having the property of plasticity. Plastics are designed with immense variation in properties such as heat tolerance, hardness, resiliency and many others. Combined with this adaptability, the general uniformity of composition and light weight of plastics ensures their use in almost all industrial segments.
|
POLYMERS |
|
Polymer is a generic term used to describe a very long molecule consisting of structural units and repeating units connected by covalent chemical bonds. The term is derived from the Greek words: polys meaning many, and meros meaning parts [1]. The key feature that distinguishes polymers from other molecules is the repetition of many identical, similar, or complementary molecular subunits in these chains. These subunits, the monomers, are small molecules of low to moderate molecular weight, and are linked to each other during a chemical reaction called polymerization.
|
|
Still can't find the expert you want?
|
Try using a broader keyword search or browse our Category Directory.
|
|
Vinyl Experts Witnesses - Vinyl Forensic Consultants.
Find Vinyl experts and consultants for Vinyl litigation support. Available to be Vinyl expert witnesses and provide Vinyl forensic consulting in Vinyl litigation, in addition prepare Vinyl expert witness reports for use in deposition and/or in-court trial testimony.
Find
Vinyl
|
|
